background image

Treatment of 

Abnormalities

When  abnormalities  are  detected  such  as  a  gas  leak, 

abnormal  combustion  (such  as  tempering,  flame  lifting, 

yellow smoke or black smoke emission), peculiar smell and 

abnormal sound, or other emergent situations, immediately 

shut  off  the  gas  valve  and  contact  the  maintenance 

department or the gas company for treatment.

Maintenance

1.  Frequently check whether the Gas Intake Pipe (rubber 

hose) is in good condition and whether there is aging or 

any  flaw.  Regularly  change  the  rubber  hose  and 

frequently use the soapy water to determine whether 

there  is  a  gas  leak  by  checking  whether  there  are 

bubbles at the pipeline connectors.

2.  After  the  water  heater  is  used  for  a  period  of  time 

(generally about half a year), it is necessary to check 

and  clean  the  water  heater  to  ensure  it  operating 

normally. Frequently observe the burning conditions of 

the  flame.  When  the  flame  turns  form  blue  to  yellow 

and there arises black smoke, contact the technician in 

time for cleaning.

3.  Frequently use soft cleaning cloth to wipe the hull of the 

water  heater  with  clean  water  or  neutral  detergent 

rather  than  chemical  detergent  or  volatile  solvent. 

Otherwise,  the  color  of  the  hull  will  fade  away  and 

tarnish.

4.  Regularly  clean  the  water  intake  filter  of  the  water 

heater.

5.  When the water heater is not used for a long period of 

time,  screw  off  the  drain  valve  and  drain  the  excess 

water in the water heater to avoid any damage to the 

water heater according to the Other Cautions.

Repairing Services

1.  The  water  heater  must  be  regularly  checked  and 

cleaned by the professional personnel.

2.  Non-professional  personnel  cannot  open  the  front 

cover of the water heater.

Packing List

Water Inlet Filter

Off

De

ter

ge

nt

Gas 

Valve

Name and Illustrations 

Quantity

Name and Illustrations 

Quantity

Water Heater

Gas Pipe Connector 

(None for the 

manufactured gas 

water heaters)

Instruction Manual

M6 Expansion Screw (1 for some models)

Shower 

Components

Plastic Plug Tapping 

Screw

Corrugated Tube 

or Water Inlet Hose

or

Summary of Contents for JSQ Series














Reviews: