![background image](http://html1.mh-extra.com/html/midea/ika-bo13f88l-dtc/ika-bo13f88l-dtc_user-manual_1791454016.webp)
again then set it in minutes. When you finished the setting, touch to make sure
When you set the end time, you need set cooking duration time. Please check cook-
ing with oven
→
NOTE to see how to set cooking duration time.
For example, when you set end time is 10 o’clock, and cooking duration time is 1 hour,
then oven will heat up at 9 o’clock, and finish at 10 o’clock
Childproof lock
Your appliance has a childproof lock so that children cannot switch it on accidentally or
change any settings.
When you give a long press for 3 seconds, childproof lock is activated. A long press for 3
seconds again the oven is unlocked.
You can activate and deactivate childproof lock when the oven is work or not. Give
a long press for 3a long press for 3 seconds you can switch on and o
ff
the childproof
lock. When the childproof is on, there will be a in the status bar.
Notes
1.
2.
Meat probe can be used together with rotary system;
While using meat probe , please make the head of it into the food instead of some-
where else , for the sake of long-term using.
Meat probe
Your oven has an additional meat probe function . When you insert the meat probe
into the position, the icon will be light on . At the same time, the clock area will be
changed to show the temperature setting of meat probe, you can use + and - , also the
choose the fuction, adjust tempera-
ture the same way, and turn the oven on by pressing (Before
, make sure
is well prepared ). In this mode, icon
is used to change both the meat
and core temperature . And you can get the setting
process of cooking.
slider to change the setting. Then press
in
start
everything
probe
changed also during the
DEMO WITH SABBAT MODE
Demo mode
Demonstration mode, with power-off saving data function. Power off saving function:
for example, when the demo mode is set to on, power off and then on is still on. After
the demonstration mode is turned on, the heating pipe does not work.
1.. In standby mode, press and hold the " " key to enter the demonstration mo and
display "off";
2.. Slide the slider to the right to open the demonstration mode and display "o˜"; sli
the slider to the left to close the demonstration mode and display "on";
14