Schematic Circuit Diagram
Analysis and handling of abnormal
Handling of Abnormal
1. In case the product appear abnormal situations such as: Abnormal noise,
smells, smoke, etc, please immediately cut off the power supply and stop
using it.
2. In case the product does not work: Please check whether the power
supply is connected well, whether the switch is on the open position,
and whether the accessories are installed in place.
3. In case the product still does not work after inspection, please consult
with and the designated maintenance center for maintenance.
Fault Analysis and Removal
(Attention: In case the circuit is changed without notice)
Fault
Analysis on possible
reason
Solution
If energized, start the
button, but the product
does not work
The plug is not inserted in
the right place
Normal phenomenon of
new motor in initial
utilization
1. Low voltage \
2.Temperature control
protection of the motor
Stirring rod is not installed
in jack of main egg
beating net
No gear is moved to “0”
Insert the plug in the right place
If it is utilized many times, the product
still gives off the smell; please contact
with Midea customer service center to
get help.
1. Inspect that the voltage is too slow
2. Restart it upon suspension for
20-30min
Stirring rod is aligned with the jack on
the main body for installation; when you
listen to “click”, it indicates proper
installation
When the gear is moved to “0”, press
“Rod Out” button
When you use the
product in the first few
times, the product will
give off smell.
Closing down during
working
Stirring rod falls off
“Rod Out” button
cannot be pressed
In case the problem persists, or any another problem occurs, contact Midea
Customer Service Center for assistance.
8
Summary of Contents for HM0273
