![background image](http://html1.mh-extra.com/html/midea/em720a-series/em720a-series_instruction-manual_1791365018.webp)
2
URNTABLE RESET FUNCTION
1.. When cooking finished, if the turntablis not at the initial position, it will enter the
turntable reset function. At this time, the lamp, fan and turntable are working, “
will dynamic display. After the turntable has reset, the oven stops cooking and
reminds cooking finished.
2.In waitng state, press number key "
9
" for 3 seconds, there will be a long “beep”
.. This function only works for one coleted cooking. If pause or open the oven door
.. Under the reset state, opening the door or "
STOP/CANCE
"
key is pressed
denoting turntable reset function is turnned off. "OFF" will display. To turn on the
turntable reset function, in waiting state press number key "
9
" for 3 seconds, there will
be a long “beep” denoting that turntable reset function is released."On" will display.
Note:
1
during cooking, the current cooking cannot enter the turntable reset function.
2
oven will go back to waiting state.
2
SMOKE SENSOR
1.
This microwave oven is equipped with a patent-pending, built in Smoke Sensor to
automatically shut off the oven before a cavity fire can occur. Should the oven shut off
due to excessive smoke the display will show "Err
1"
and the oven will beep 3 times.
2.
Before reaching into this appliance, look through the window. If you can remove the
food item without injuring yourself, open the oven door and carefully remove the food
item emitting smoke. Leave the oven door open for afew minutes to allow the smoke to
clear
3.
To re-start the oven with another food item touch the
"STOP/CANCE
"
pad, insert
the food item into the oven and close the door. Select the desired cooking program for
the new food item and touch the
"
START/ +30 SEC.
"
/
"
STOP/CANCE
"
pad.
Should the oven immediately shut off, display “ErM” and beep 3 times. Open the oven
door to allow the smoke from the previous cooking session to clear before attempting
to re-start the oven.
1
8
1.T
2.