![background image](http://html1.mh-extra.com/html/midea/em720a-series/em720a-series_instruction-manual_1791365016.webp)
16
15. MEMORY FUNCTION
(1) Press the numeric key "
0/MEMORY
" once, and then press the key "
0/MEMORY
" for
several times to choose memory 1 to memory 3 in turn, and "1" to "3" will display.
(2) If the procedure has been set, press "
START/+30SEC.
" to use it. If not, continue
to set the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "
" once to save the procedure.
If press "
" again, it will start cooking.
Example: To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3 minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press
"0/MEMORY
" twice, stop pressing until the screen displays "2".
b.Press "
TIME COOK
" once, then press "3", "2", "0" in order.
c. Press "
POWER
" once, "PL10" displays, then press "8" and "PL8" displays.
d. Press "
START/ +30 SEC.
" to save the setting. Buzzer sounds once and the screen will
display "2". If you press "
START/+30SEC.
" again, the procedure will be saved as the
memory 2 and operated.
" twice,
screen displays "2", then press "
START/+30SEC.
" to run.
e. If you want to run the saved procedure, in waiting state, press "
START/+30SEC.
START/+30SEC.
0/MEMORY
1
6
. OTHER SPECIFICATIONS
(1) In standby state , if the set clock digital tube displays current time, the icon " : " would
flash; otherwise, it shows "
0:00
".
(2) In setting function state, the screen displays corresponding setting.
(4) In working or pause state, the screen displays surplus cooking time.
(6) If the time exceeding 9:99 is input to set the cooking alarm, the buzzer will give a
long sound denoting error after the "
START/ +30 SEC.
" key is pressed and the
"Err" indicator will display. At this point, there will be no response after any other
buttons are pressed, and the "Err" indicator will not disappear after the oven door is
opened.
To cancel the "Err" indicator display, please follow the following steps:
a. Press the "
STOP/CANCEL
" key within 1 minute;
b. No operation and it will automatically return to standby state after 1 minute.
The total time for cooking shall not exceed 9:99. It is allowed to increase the time for
cooking by pressing the "+30s" button during operation, but if the time exceeds the
maximum time for cooking, there will be no response after pressing the
"
START/ +30 SEC.
" key.
(Since the minimum time for the setting is 30s, the time for cooking is bound to be less
than 9:99, therefore, the total time for cooking only needs to within 9:69 - 9:99).
(3) Seconds are not converted into minutes in cooking Settings.
(5) Other functions can be switched during the function setup phase.