16
GB
17
EMPTYING THE DUST COLLECTOR /
CLEANING / CHANGING THE FILTERS
• Disconnect the suction hose from the appliance.
• Press the cover-lock button (see Fig. 1) and
open the dust container cover.
• Using the carry handle, lift the dust container up
out of the unit (see Fig. 2).
• Hold the dust container over a refuse bin
and using the locking button, unclip the filter
cartridge as shown in Figures 3 und 4. You will
subsequently be able to empty the container.
• The interior of the dust collector can then be
cleaned using a dry cloth.
• In addition, the filter cartridge of the dust
container must be regularly cleaned.
• To clean the filter, initially beat this over refuse
bin and then remove the remaining dust using a
fine brush (see Fig. 5).
• Correctly replace the filter insert inside the dust
collector.
• The cleaned dust collector can now be put back
into the appliance. Use slight pressure to close
the dust collector cover, and this should lock into
place with a ʻclickʼ.
CLEANING / CHANGING THE FILTERS
In order to ensure the smooth running of the
device, it is also important to make sure the motor
protection filter is cleaned at regular intervals. If the
filter is significantly dirty or damaged, it must be
replaced for a new filter.
Only use filters exclusively designed for use in this
unit and suitable filters of the correct size.
• Remove the filters and tap to remove the dust
trapped in them.
• Wash the filter every so often by hand in cool
soapy water. Rinse thoroughly with clean water
to remove any remaining dust particles and
soap.
• WARNING! Only place the filter back into the
vacuum cleaner, when it is completely dry.
30785-English_2 .indd 16
29/1/07 4:01:42 PM
