background image

1.Important information for your safety 

Setup 

• Check the bread maker for transport damage after unpacking. If necessary, contact 
your supplier. 
• Place the appliance on a dry, flat and heat-resistant surface. 
• Do not place the appliance near gas burners, electric ovens or other heat sources. 
• Do not place the appliance near any inflammable materials, explosive and/or 

self-igniting gases. 

• Make certain that the ventilation slits of the appliance are not covered. 
• Before plugging in the appliance, check whether the electricity type and mains 
voltage match the information on the type plate. 
• Do not draw the power cord over sharp edges or close to hot surfaces or objects. 
This may damage the insulation of the power cord. 
• To prevent anyone from tripping over, the appliance is provided with a short power 
cord. 
• If you plan to use an extension cable, make sure that the maximum permissible 
power rating of the cable corresponds with that of the bread maker. 

• Place the extension cable in such a way as to prevent anyone from tripping over it or 
pulling it accidentally. 
•This appliances are not intended to be operated by means of an external timer or 
separate remote-control system. 

 

During operation 

• Check the condition of the power cord and plug frequently. If the power cord of this 
appliance is damaged, it must be replaced by the manufacturer, the manufacturer's 
customer service or a similarly qualified person to avoid associated dangers. 
• Children using electrical appliances or standing close to them may be allowed only 
under the supervision of an adult. 
• This appliance complies with the normal safety regulations. Inspection, repair and 
technical maintenance may only be performed by a qualified specialist. 
• Do not place any objects on the appliance and do not cover it during operation. Fire 
Hazard! 
• Caution, the bread maker becomes hot. Only touch the handles and touch buttons of 
the appliance. If necessary, use a kitchen cloth. 
• Before taking out the accessories or inserting them, allow the appliance to cool down 
and unplug the power cord. 
• Do not re-locate the bread baking machine if the bread pan contains hot ingredients 
or liquids. 
• Avoid contact with the rotating kneading paddles during operation. Injury hazard! 

3

Summary of Contents for AHS15BC-P

















Reviews: