Steam cleaning function
This function use steam to soften scales inside the cavity which make the cavity easier
to clean.
1.. Power up the system, Push and take out water box. Inject 1000ml fresh water into the
water box.
2.. Push the water tank into the appropriate location of the appliance.
3.. In standby mode, touch "A "button for several times until the screen display "A11" which
means the oven enters steam clean function. Time area shows default time "05:00min".
4. Press " " to start the program.
Notes
Time of steam clean cannot be adjusted. Press pause key or open door the clean process
will paused. Close the door
and
press start key cleaning process will restart.
For best cleaning results, we recommend that you use detergent sodium citrate, which
were randomly for descaling steam oven. Follow the manufacturer's instructions on
the packaging. It is suggested that descaling function should be used after the steam
function has been run for 20 hours.
Auto Scale Removal Funct
ion
In standby mode, touch
" "button for several times until the screen display
"
A10
" which means the oven enters auto scale removal function. "min" and
default time "40:00"
lighten, tank icon show the current water level ( Water, lack of
water, full of water ), other icons disappear.
1.
Power up the system, remove the water tank, inject 1000ml of fresh water into the
water
tank, adding a pack of descaling agent.
3.
2. Push the water tank into the appropriate location of the appliance.
5.
6. Replace the water, repeat steps 3 to 4.
When the remained time counts down to 10:00, the program is paused and
reminds lack of water. Take out the water tank and pour the water in the tank.
Thoroughly clean the water tank.
4. Press " " to start the program.
Notes
T
he desca
l
ing process shall not be shut down. If the descaling process shut down
befor
e
the end, the entire program must be started from step 3.
15