Label Identification and E-Stops
Air Dump Valve:
To remove pneumatic energy from the system, use the air dump valve. This will
exhaust all of the air from the system. This also acts as an E-stop. When the dial is
turned to show “EXH” in the window, then the air is dumped.
When performing maintenance tasks, the power
disconnect switch must be locked using the in plant lock
out tag out (LOTO) procedures.
Pinch point/Crush hazard:
DO NOT operate without guards in place and shut off air and electrical power
before servicing.
Burn hazard:
Avoid touching surfaces/ components during operation. Wait an appropriate
amount of time for cool down before servicing.
No Step:
This designates parts or surfaces of the machine that are not designed to
support the weight of a person. Using these areas as a step could result in
injury and/or damage to the machine.
Pg. 6