background image

iii

MIDDLEBY MARSHALL INC.

OVEN LIMITED WARRANTY

(Non U.S.A.)

The Seller warrants equipment manufactured by it to be free from
defects in material and workmanship for which it is responsible. The
Seller’s obligation under this warranty shall be limited to replacing or
repairing, at Seller’s option, without charge, F.O.B. Seller’s factory,
any part found to be defective and any labor and material expense
incurred by Seller in repairing or replacing such part. Such warranty
is limited to a period of one year  from date of original installation or
15 months from date of shipment from Seller’s factory, whichever is
earlier, provided that terms of payment have been fully met. All labor
shall be performed during regular working hours. Overtime premium
will be charged to the Buyer.

This warranty is not valid unless equipment is installed, started,
and demonstrated under the supervision of a factory-autho-
rized installer.

Normal maintenance functions, including lubrication, adjustment of
airflow, thermostats, door mechanisms, microswitches, burners and
pilot burners, and replacement of light bulbs, fuses and indicating
lights, are not covered by warranty.

Any repairs or replacements of defective parts shall be performed by
Seller’s authorized service personnel. Seller shall not be respon-
sible for any costs incurred if the work is performed by other than
Seller’s authorized service personnel.

When returning any part under warranty, the part must be intact and
complete, without evidence of misuse or abuse, freight prepaid.

Seller shall not be liable for consequential damages of any kind
which occur during the course of installation of equipment, or which
result from the use or misuse by Buyer, its employees or others of
the equipment supplied hereunder, and Buyer’s sole and exclusive
remedy against Seller for any breach of the foregoing warranty or
otherwise shall be for the repair or replacement of the equipment or
parts thereof affected by such breach.

The foregoing warranty shall be valid and binding upon Seller if and
only if Buyer loads, operates and maintains the equipment supplied
hereunder in accordance with the instruction manual provided to
Buyer. Seller does not guarantee the process of manufacture by
Buyer or the quality of product to be produced by the equipment
supplied hereunder and Seller shall not be liable for any prospective
or lost profits of Buyer.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF
ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSO-
EVER. SPECIFICALLY THERE ARE NO IMPLIED WARRANTIES
OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR
PURPOSE.

The foregoing shall be Seller’s sole and exclusive obligation and
Buyer’s sole and exclusive remedy for any action, whether in breach
of contract or negligence. In no event shall seller be liable for a sum
in excess of the purchase price of the item.

Model No.
Modéle No.

Serial No.
Serié No.

Installation Date
Date d'installation

MIDDLEBY MARSHALL

N

O

 Q

UIBBLE

 L

IMITED

 W

ARRANTY

(U.S.A. O

NLY

)

MIDDLEBY MARSHALL, HEREINAFTER REFERRED TO
AS “THE SELLER”, WARRANTS EQUIPMENT MANUFAC-
TURED BY IT TO BE FREE FROM DEFECTS IN MATE-
RIAL AND WORKMANSHIP FOR WHICH IT IS RESPON-
SIBLE.  THE SELLER’S OBLIGATION UNDER THIS WAR-
RANTY SHALL BE LIMITED TO REPLACING OR REPAIR-
ING, AT SELLER’S OPTION, WITHOUT CHARGE, ANY
PART FOUND TO BE DEFECTIVE AND ANY LABOR AND
MATERIAL EXPENSE INCURRED BY SELLER IN REPAIR-
ING OR REPLACING SUCH PART.  SUCH WARRANTY
SHALL BE LIMITED TO THE ORIGINAL PURCHASER
ONLY AND SHALL BE EFFECTIVE FOR A PERIOD OF
ONE YEAR FROM DATE OF ORIGINAL INSTALLATION, OR
18 MONTHS FROM DATE OF PURCHASE, WHICHEVER
IS EARLIER, PROVIDED THAT TERMS OF PAYMENT HAVE
BEEN FULLY MET.

This warranty is valid only if the equipment is installed, started,
and demonstrated under the supervision of a factory-autho-
rized installer.

Normal maintenance functions, including lubrication, clean-
ing, or customer abuse, are not covered by this 

no quibble

warranty

.

Seller shall be responsible only for repairs or replacements
of defective parts performed by Seller’s authorized service
personnel.  Authorized service agencies are located in prin-
cipal cities throughout the contiguous United States, Alaska,
and Hawaii.  This warranty is valid in the 50 United States
and is void elsewhere unless the product is purchased
through Middleby International with warranty included.

The foregoing warranty is exclusive and in lieu of all other
warranties, expressed or implied.  There are no implied
warranties of merchantability or of fitness for a particu-
lar purpose.

The foregoing shall be Seller’s sole and exclusive obligation
and Buyer’s sole and exclusive remedy for any action, in-
cluding breach of contract or negligence.  In no event shall
Seller be liable for a sum in excess of the purchase price of
the item.  Seller shall not be liable for any prospective or lost
profits of Buyer.

This warranty is effective on Middleby Marshall equip-
ment sold on, or after, February 15, 1995.

©  2003 - Middleby Marshall, A Middleby Company.
The Middleby Marshall logo is a registered trademark of Middleby Marshall, A Middleby Company.

Middleby Marshall Inc.  •  1400 Toastmaster Drive  •  Elgin, Illinois  60120-9272 U.S.A. •  (847) 741-3300  •  FAX: (847) 741 4406

Summary of Contents for PS640G

































Reviews: