Middleby Marshall PS360G Gas, Owner'S Operating And Installation Manual

Page: 26 / 42

21
B. Changing Energy Mode Status (Run Mode)
If he photo eye should ever fail to operate, baking mode can be continually engaged by disabling the energy
mode. A service call should be made in the interim, as energy use will be considerably higher without the
energy mode.
Press until ENERGY MODE is flashing. Press
BELT
. Status of energy mode will be flashing (i.e., YES or
NO). Press to change status to desired state. Press
BELT
to accept status change. Press
X
to
leave the BLOWER CONFIGURATION screen.
C. System Setup
Enter SYSTEM SETUP menu (
Can only be done in OFF mode)
Four control system values can be changed that relate to the user interface for the daily oven operator:
1. Actual temperature display always on or off
2. Set temperature lock on or off
3. Belt time lock on or off
4. Degrees Celsius shown, or default degrees Fahrenheit.
Press key. “PASSWORD” will appear on the screen.
Press
X
and
BELT
. The screen should appear as below.
Press until the item you want to change is flashing, then press
BELT
. Now press until the setting you
desire is displayed, then press
BELT
. Press
X
to leave the SYSTEM SETUP menu. Press
X
to
return to operating mode.
SYSTEM SETUP
SHOW TEMP ALWAYS: YES
SET TEMP LOCKED: NO
SET TIME LOCKED: NO
CELSIUS: NO