Middle Atlantic C3-SHELFKIT Instruction Sheet Download Page 4

SUPPLIED COMPONENTS AND HARDWARE

Partially Pre-Assembled Slide-Out Rack

A

Lever Lock Brackets

B

(2x)

Securing Rivet

C

(5x) 8-32 x 5/16” 

Thread Forming 

Screw

D

(20x) 

Washer

E

4” Lever Lock

Vertical Plate

F

Power Strip

(10’ Cable Length)

J

(2x) 10-32 x ¼” 

Flat Head Screw

G

 (2x) Power 

Mounting Clip

H

SLIDE-OUT RACK OPTION (C3-TECHKIT4-SO)

WEIGHT RATINGS

AVERTISSEMENT

: Ce produit est destiné à être utilisé uniquement avec les produits et les poids maximum indiqués. L'utilisation 

avec d'autres produits ou produits plus lourds que le poids maximum indiqué peut entraîner une instabilité pouvant causer des 

blessures. Le poids total de l'équipement ne doit pas dépasser les quantités indiquées dans le tableau précédent.

WARNING

: This product is intended for use only with the products and maximum weights indicated. Use with other products or 

products heavier than the maximum weights indicated may result in instability causing possible injury. Total equipment weight must 

not exceed the amounts indicated on the previous table.

C3 1-Bay 24” (610 mm) and 32” (813 mm) Height

C3 2-Bay 24” (610 mm) and 32” (813 mm) Height

C3 3-Bay 24” (610 mm) and 32” (813 mm) Height

C3 4-Bay 24” (610 mm) and 32” (813 mm) Height

Slide-Out Rack Option (C3-TECHKIT4-SO)

Fixed Rack Option (C3-TECHKIT4-ST)

Shelf Kit Option (C3-SHELFKIT, Weight Per Shelf)

Display Mount Option (C3-XX-LDXU, Weight Per Screen)

75 lbs. (34 kg) Per Bay, 25 lbs. (11 kg) On Top, 100 lbs. (45 kg) 

Maximum Total Rated Load

75 lbs. (34 kg) Per Bay, 50 lbs. (23 kg) On Top, 200 lbs. (91 kg) 

Maximum Total Rated Load

75 lbs. (34 kg) Per Bay, 75 lbs. (34 kg) On Top, 300 lbs. (136 kg) 

Maximum Total Rated Load

75 lbs. (34 kg) Per Bay, 100 lbs. (45 kg) On Top, 400 lbs. (181 kg) 

Maximum Total Rated Load

75 lbs. (34 kg) 

Maximum Total Rated Load

75 lbs. (34 kg) 

Maximum Total Rated Load

30 lbs. (14 kg) 

Maximum Total Rated Load

125 lbs. (57 kg) 

Maximum Total Rated Load

Model Number

Weight Rating

Page 4

If any pieces are missing or damaged, please report it immediately to Technical Support at 

[email protected] or (866) 977-3901.

Summary of Contents for C3-SHELFKIT













Reviews: