Middle Atlantic C3-SHELFKIT, Instruction Sheet

Page: 11 / 12

INSTALLING LEVER LOCK OPTION INSIDE SLIDE-OUT RACK (CONTINUED)
5. Repeat the process to install the second Lever Lock adapter bracket (K) in the same position as the
first, but on the opposite side of the rack. ( FIGURE L )
FIGURE L
NOTE : There are
3 different depths
available on the
Lever Lock
adapter brackets.
K
NOTE :
• The Lever Lock vertical channel or plate may be installed on the brackets at different depths. ( FIGURE L )
• All 4 corners of the Lever Lock vertical channel or plate must be inserted into adapter brackets at the
same depth in order to function correctly.
• Use (20x) washers (R) for equipment mounting convenience.
6. Attach 2” Lever Lock vertical channel (M) or 10” Lever Lock vertical plate (N, 10” Lever Lock vertical
plate shown) by installing the side without the clip into one of the adapter brackets first. Then, install
the side with the clip into the other adapter bracket until it clicks into place. ( FIGURE M )
FIGURE M
Clip
NOTE : 10” Lever Lock vertical
plate (N) shown.
NOTE : Install a securing rivet
(P) into hole to secure the clip more
permanently, if desired.
Side
without
clip
Side
with
clip
Page 11