Midas XL8 DL471, Operator'S Manual

Page: 31 / 70

Menus
15
DL471 DSP
Operator Manual
4
Press SELECT to select the currently displayed
contrast. The flashing will stop.
5
Press MENU. The contrast of the LCD screen will now
be at the newly configured level.
AMELink Speed menu (8)
The “AMELink Speed” menu lets you choose the speed of the AME link, which can be
125MHz or 133MHz.
>> To change the AME link speed
1
In programming mode, select the “AMELink Speed”
menu (see “To select a menu” on page 9). The current
speed is displayed on the bottom line of the display,
for example, “125MHz”.
2
Press SELECT. The flashing character shows you are
in AME link speed set up mode.
3
Use the up/down arrow buttons to go to the other
option.
4
Press SELECT to select the currently displayed
contrast. The flashing will stop to show that this
option is now selected.
5
Press MENU.
For the new AME link speed to take effect, switch the unit off and then on again.