B2316 User Manual V1.0
http://www.mictrack.com
4
9.1 Change the password
SMS Command format: password,old passport,new password#
For example : password,0000,1234#
Reply: password=Success!
9.2 Set APN (Access Point Name)
SMS Command format 1: apn,password,apn,,#
For example : apn,0000,iot.nb,,#
SMS Command format 2: apn,password,apn,username,password#
For example: apn,0000,internet,internet,internet#
Reply: apn=Success!
9.3 Set the IP and port
SMS Command format : data,password,ip:port#
For example : data,0000,113.98.254.179:7700##
Reply: data=Success!
9.4 Working mode
9.4.1 Deep sleep interval mode
SMS Command format: Mode,password,1,T#
For examples: Mode,0000,1,30#
Reply: mode=success!
Note:
Device will wake up and report one data to server every 30 minutes, after that it will
go to sleep again until the next 30 minutes . T is [1-1440] minutes.
9.4.2 GPS sleep mode
SMS Command format: Mode,password,5,T#
For examples: Mode,0000,5,10#
Reply: mode=success!
Note:
The device will wake up every 10 minutes and report one data to the server, after
that it will go to sleep again until the next 10 minutes. T is [1-1440] minutes.
9.4.3 GPS always ON mode
SMS Command format: Mode,password,6,T#
For examples: Mode,0000,6,10#
Reply: mode=success!
Note:
The device will report data every 10s .T is [10-86400] seconds.
9.4.4 Power Saving mode
SMS Command format: Mode,password,7,T#
For examples: Mode,0000,7,10#
Reply: mode=success!
Note:
When the device detects continuous vibration for more than 10s, it will wake up and
starts to connect to the network, After connected it will Immediately report a data (event
15) to the platform;
