Probe Structure
3
Probe Structure
Probe Slider and Wire
Grip
1.
When the slider is in the "LOCK" lock position, you can degauss the probe and take
measurements.
2.
Move the slider to the "OPEN" unlocked position to insert or remove the wire from
the wire clip.
3.
The grip will accept wire diameters up to 5mm.
4.
Place your finger behind the safe handling area (the area inside the dashed line in the
figure) when measuring.
WARNING: Do not force wires larger than 5 mm in diameter into the grips, as doing
so may result in damage to the probe.
WARNING: To avoid electric shock, do not touch areas within the safe handling area
(the area within the dashed line in the diagram) when taking measurements.
Warning: Do not drop the probe or subject it to strong shocks, as this may
result in damage to the probe.
Warning: Do not connect the current probe to any wire whose voltage or current
exceeds the probe rating.
