6
The equipment has a self-supporting construction and is very easy to install.
There is an installation bracket included in the equipment accessories, which must be fixed on the wall. The axis of the fixation slots
is 210 mm lower than the top edge of the device. The distance between the fixation slots is 420 mm (DRY 300 SILVER/METAL) and
360 mm (DRY 500 SILVER/METAL). When the bracket is fixed, it is possible to hang up the device without dismounting its cover.
6.2.
Equipment fixation
Model DRY 300 SILVER/METAL
Model DRY 500 SILVER/METAL
TOP EDGE OF THE DEVICE
BRACKET
SPIRIT LEVEL
FIXATION SLOTS
The cover can be dismounted after releasing two screws (DRY 300 S
) or three screws (DRY 500 S
)
at the bottom of the device. Release the screws, pull the bottom part of the cover toward yourself and then, by lifting it shortly, rake
down the cover from the rear plate. To mount the cover, carry the procedure out in reverse order.
ILVER/METAL
ILVER/METAL
6.3.
Dismounting and mounting of the cover
TOP EDGE OF THE DEVICE
BRACKET
SPIRIT LEVEL
FIXATION SLOTS
WALL-MOUNTED SWIMMING POOL DEHUMIDIFIER - OWNER´S & INSTALLATION MANUAL
Summary of Contents for DRY 300 METAL
Page 18: ......
