MICROWELL DRY 1200 METAL, Installation And User Manual

Page: 42 / 64

Installation and user manual D R Y 8 0 0 / 1 2 0 0 M e t a l
V01/2022 | 4 2
5.7 Air filter – on demand
Your dehumidifier can be equipped with an air filter on request. The air filter traps dust and other mechanical
particles and prevents them from entering the fins of aluminum heat exchangers. Although the air filter
contributes to the cleanliness of the dehumidifier, it does not have the function of an antibacterial HEPA filter.
The operation of your dehumidifier is highly dependent on the continuous supply of air from the environment.
It is therefore important to keep the air filter clean. Please read the simple steps below to clean the filter. If the
filter is clogged with dirt, it creates a barrier to air supply. The manufacturer recommends cleaning at least
once a month. The manufacturer, distributor and dealer are not responsible for damage or malfunction of the
device resulting from insufficient cleaning of the air filter.
When replacing the filter, it is necessary to disconnect the dehumidifier from the el. and the device must be
switched off.
5.
Clean the filter with a vacuum cleaner or rinse with clean warm water. If necessary, you can use a
mild detergent. Allow the cleaned filter to dry. Do not expose the filter to the sun.
6.
Then install the filter according to the above steps in reverse order.
1
. Remove the dehumidifier cover. Pay
close attention to the controller
connectors, such as cables and antennas.
2.
Unscrew the 2 screws on the right side
and easily loosen the 3 screws on the left
side.
3.
Pull out the filter and slide it to the
bottom left.
4.
Remove the filter from the dehumidifier.