A
Channels & Frequencies
A-1
CodeRunner 2
Operator’s Guide/Tech Ref Manual
Channels
&
Frequencies
A.1
Appendix Overview
This Appendix presents the channels and frequencies that were
programmed into your CR2 at the factory. It also provides the
frequencies set by the latest US frequency reallocation plan.
Here are the topics covered:
A.2
Initial Factory Presets
This section lists the channels and frequencies for each RF band
covered by the CodeRunner 2. These frequencies are preset at
the factory, but can be modified using the Channel Plan Menu,
found under the “
Mod CP
” option on the Main Menu screen.
See the “Advanced Operation” chapter of the
CR2
Technical
Reference
Manual
.
Note
These frequency settings should only be changed
by qualified technical personnel.
Topic
Page
