Strata Operations Guide
-
16 -
TCU “Signal In” Connection – not DC isolated
Note:
To minimize the potential for damaging the TCU signal input circuitry, the “Signal Out” jack rear panel
BNC connector has been changed to a TNC type connector. Users are cautioned not to use a TNC-to-
BNC adapter on the TCU “Signal Out” jack to circumvent this protection feature. Each Strata TX system
that includes TXU and TCU modules is shipped with a short BNC-to-TNC coaxial cable assembly for
interconnecting TXU and TCU modules. For those system applications that require separating the TXU
and TCU over longer distances, users are advised to use a BNC “barrel” adapter on the BNC end of the
supplied coaxial cable assembly.
