Strata Operations Guide
-
18 -
5. Enter
1
or
2
depending on which PC serial data (RS-232) COM port is being used.
Note:
If the Strata TX Configurator application is unable to open a valid serial data port or an invalid
number is entered, you will receive the following error dialog:
If you are unable to open a serial port or establish a valid serial port connection to a Strata TX radio
system, exit the application and attempt to determine the difficulty and try again.
6. Assuming a valid serial data connection is established with a Strata TX radio system, you should see
the main
Customer
screen display with all front panel controls activated as shown below.
7. Next use the
“Load Settings From Radio”
function to retrieve the current Strata TX radio
configuration. It is recommended you store this configuration to a file using the
“Save Settings to
File”
function especially when any modifications have been made to the current radio settings.
8. Access the Global, COFDM, MPEG Video, MPEG Audio, FMT and RF Settings menus by clicking
on the appropriate menu tabs. The channel frequency settings found in the “Channel Plan” tab are
only accessible for systems that do not include the “Frequencies Locked to Presets” option.