6
7
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference (2) this device must accept any interference received
including interference that may cause undesired operations. This applies to all product options.
FCC Radio Frequency Interference Statement
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
» Reorient or relocate the receiving antenna.
» Increase the separation between the equipment and receiver.
» Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
» Consult the dealer or an experienced radio/TV technician for help. To comply with FCC RF ex-
posure compliance requirements, a separation distance of at least 20 cm must be maintained
between the antenna of this device and all persons. This transmitter must not be collocated or
operating in conjunction with any other antenna or transmitter.
Caution: Changes or modifications to this equipment not expressly approved by manufacturer
could void the user’s authority to operate this equipment.
CE Statement
This product complies with the requirements of the Low Voltage Directive 2006/95/EC and
the EMC Directive 2004/108/EC and carries the CE mark accordingly.
Directions for Recycling Battery
Recycle battery in accordance with local laws. In the United States and Canada, visit
www.call2recycle.org or call 1-800-8-BATTERY (1-800-822-8837) or 1-877-2-RECYCLE
(1-877-273-2925) for the nearest recycling center.
Product Disposal
The SHOWWX™ laser pico projector should not be placed in household waste bins. Please check
local regulations for information about the disposal of electronic products in your area.
Made for iPod
®
“Made for iPod” means that an electronic accessory has been designed to connect
specifically to iPod and has been certified by the developer to meet Apple perfor-
mance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Copyright & Trademarks
© 2009 Microvision, Inc. All rights reserved. iPod, and Made for iPod are trademarks of Apple, Inc.,
registered in the U. S. and other countries. Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards. The Microvision “swirl”, PicoP and SHOWWX are
trademarks of Microvision, Inc.
Package Contents
Please make sure you have received all items included with the product. For missing items contact
customer support.
SHOWWX
Laser Pico Projector
SHOWWX Cable
for iPod
®
SHOWWX
Wall Charger
SHOWWX
Composite Adapter
Wrist Strap
SHOWWX
Rechargable Battery
Micro-USB Cable
Storage Pouch
User Guide
+ -
+ -
B
SHOW
WX
L A S E R P I CO P R OJ E CTO R
M I C R O V I S I O N
™
User Guide
