MICROTRONIX DX-2200, User Manual

Page: 51 / 103

DX-2200
– SD/HD-SDI Text & Graphics Inserter – User Manual
Page 51 of 103
Command
Code
Mode of Operation
SnnFfff
For Layer 1, set the font & size for Graphic Field nn.
fff is a number of between 1 and 3 digits in length. Refer to Table 9: Text and Symbol
Fonts for the list of choices.
The default for 720p and 1080p is font 1 and 2 respectively.
SnnPAxxxx,yyyy
SnnPBxxxx,yyyy
For Layer 1, set location coordinates for Graphic Field nn.
Each Field has two location coordinates referenced by letter, either ‘A’ or ‘B’.
Coordinate A is the top-left position of a Rectangle Field, Text Field, or Corner
Marker Field, and is the center position of a Target Marker Field.
Coordinate B is the bottom-right position of a Rectangle Field or Corner Marker Field.
xxxx and yyyy are numbers between 1 a 4 digits in length.
SnnXxxxx
For Layer 1, set the x-direction position for coordinate A of the Graphic Field nn. This
command is included for compatibility with the Text Overlay command set.
SnnXaaaa,bbbb
For Graphic Field nn on Layer 1, set the x-direction position for coordinate A to the
value aaaa and set the x-direction coordinate B to the value bbbb.
SnnYyyyy
For Layer 1, set the y-direction position for coordinate A of the Graphic Field nn. This
command is included for compatibility with the Text Overlay command set.
SnnYaaaa,bbbb
For Graphic Field nn on Layer 1, set the x-direction position for coordinate A to the
value aaaa and set the x-direction coordinate B to the value bbbb.
SnnPAXxxxx
SnnPBXxxxx
For Graphic Field nn on Layer 1, set only the x-direction location of either coordinate
A or coordinate B.
SnnPAYyyyy
SnnPBYyyyy
For Graphic Field nn on Layer 1, set only the y-direction location of either coordinate
A or coordinate B.
SnnNm
For Graphic Field nn, set the justification mode. These commands use the field
length that is set separately by the SnnJmm command.
m = 0
No justification is selected
m = 1
Display the text string left justified in the field. If the string is longer than the field, it is
clipped at the right. If the string is shorter than the field it is padded with spaces at the
right.
m = 2
Display the text string right justified in the field. If the string is longer than the field, it
is clipped at the left. If the string is shorter than the field, the string is padded with
spaces at the left.
m = 3
Display the text string right justified in the field. If the string is longer than the field, the
field expands to fit the string. If the string is shorter than the field, the string is padded
with spaces at the right.
m = 4
Display the text string centered in the field. If the string is longer than the field, it is
clipped at the left. If the string is shorter than the field, it is padded with spaces before
and after to center it.
SnnJmm
For Graphic Field nn, set the field length to mm characters for justification. If the field
length is 0, justification is disabled.