MICROTRONIX DX-2200 Page 2 User Manual Download | Manualshive

Page: 2 / 103

background image

DX-2200 SD/HD-SDI

Text & Graphics Inserter

User Manual

Page 2 of 103

Document Revision History

This User Manual provides operating instructions and information on the following Microtronix products:

•

DX-2200

– SD/HD-SDI Text & Graphic Inserter with Loop Output, (Model PN: DX-2200-TI-14) and

•

DX-2200

– SD/HD-SDI Text & Graphic Inserter with PIP & Loop Output, (Model PN: DX-2200-TI-24.

The following table shows the document revision history.

Date

Rev. Description

Jan 30, 2014 1.00 Initial release

Mar 10, 2014 1.10

Changed the Text Overlay to support both text and graphics
Added two additional overlay layers
Added L commands for enhanced layer control
Added G commands to control graphics layers
Added capability to update device firmware through RS232 port.
Remove S0, S1, ST commands. Use L1D, L1E, L1V commands instead.
Added more S commands to support same functions as the G commands

Jun 10, 2014 1.20

Added the capability to receive an RGB image with transparency uploaded over
RS232, store images in flash memory, and display them on the overlay.
Fix a problem that caused graphics to be skewed for some overlay sizes.

July 21, 2014 1.21 Add wingdings font table

Oct 16, 2014 1.23 Add 13 extended UTF8 characters to the Tahoma fonts

Nov14, 2014 1.31

Fonts and images are loaded on first use to make the DX-2200 start faster
Added graphic field type 6

– rectangle specified by top/left and width/height

Enhanced the Layer commands to specify more than one layer
Increase number of graphic/text fields per layer to 48
Add commands MA0, MA1 to control ancillary data pass through
Add commands to restrict rectangle fill width to a set width around the interior
Add L1A and L1H commands to disable unused layers
Enhance GnnX, GnnY to accept one or two parameters
Add MB command to change baud rate
Add support for Rev E PCB.

Dec 15, 2014 1.32

Add information on the image transparency and background color/transparency
Fix an image background color problem.
Fix a range check problem with the L commands
Add illegal code remapping

Jun 03, 2015 1.40

Add additional Tahoma fonts
Add capability for G and S commands to operate on a range of fields
Add S/GnnNm and S/GnnJmm commands.

«
1
2
3
4
...
»

Summary of Contents for DX-2200








































































































Reviews:

No comments

Related manuals for DX-2200

Sierra Video 1208V3S

Brand: Kramer Pages: 2

Brand: Cabletron Systems Pages: 83

Cordex HP CXRF 48-2.4kW

Brand: Alpha Pages: 56

Brand: iNels Pages: 4

Brand: Microsens Pages: 42

Brand: ICP DAS USA Pages: 70

Expert Power Control NET 24x

Brand: Gude Pages: 25

Brand: Zamel Pages: 4

Brand: Black Box Pages: 15

BLEND Smart LS055

Brand: lifeSMART Pages: 13

Brand: IDK Pages: 81

Brand: A-Neuvideo Pages: 44

Brand: Lindy Pages: 12

Brand: Micronor Pages: 25

Ultraview Pro UKT-KVM-1U08-Z

Brand: Rose electronics Pages: 15

Brand: Rose electronics Pages: 14

Brand: Western Telematic Pages: 8

Wired 5-Button Switch

Brand: Synapse Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands