DX-2200
– Dual-view 2x1 SDI Video Switcher
Page 44 of 87
Command
Code
Mode of Operation
SnnBDm
For Graphic Field nn, this command controls if the fill region of a rectangle is
drawn, or if the pixels are left unchanged when the field is set to Rectangle
mode.
m = 0 - Do not draw the rectangle fill region
m = 1 - Draw the rectangle fill region.
Choosing to draw the fill region takes additional time to render and will
overwrite any pixels on the same layer, even if the fill is transparent.
SnnRrrr
For Graphic Field nn, set the value of the red component of the line color to
rrr, where rrr is a number between 1 and 3 digits in length and in the range 0
to 255.
The line color is used for text characters, the line region of rectangles, and for
corner markers and the target marker.
SnnGrrr
For Graphic Field nn, set the value of the green component of the line color to
ggg, where ggg is a number between 1 and 3 digits in length and in the range
0 to 255.
The line color is used for text characters, the line region of rectangles, and for
corner markers and the target marker.
SnnBbbb
For Graphic Field nn, set the value of the blue component of the line color to
bbb, where bbb is a number between 1 and 3 digits in length and in the range
0 to 255.
The line color is used for text characters, the line region of rectangles, and for
corner markers and the target marker.
SnnArrr
For Graphic Field nn, set the value of the transparency for the line or image to
aaa, where aaa is a number between 1 and 3 digits in length and in the range
0 to 255.
aaa = 0 makes the background fully visible.
aaa = 255 makes the background fully transparent (invisible).
The line color is used for text characters, the line region of rectangles, and for
corner markers and the target marker.
SnnFXwwww
For Graphic Field nn, set the fill width (in pixels) associated with the top and
bottom (horizontal) lines of a rectangle.
wwww is a number between 1 and 4 digits in length. A width of zero means
there is no fill associated with the top and bottom lines.
SnnFYwwww
For Graphic Field nn, set the fill width (in pixels) associated with the left and
right (vertical) lines of a rectangle.
wwww is a number between 1 and 4 digits in length. A width of zero means
there is no fill associated with the left and right lines.
SnnFLwwww
For Graphic Field nn, set the fill width (in pixels) associated with the left line of
a rectangle.
wwww is a number between 1 and 4 digits in length. A width of zero means
there is no fill associated with the left line.
SnnFRwwww
For Graphic Field nn, set the fill width (in pixels) associated with the right line
of a rectangle.
wwww is a number between 1 and 4 digits in length. A width of zero means
there is no fill associated with the right line.
SnnFTwwww
For Graphic Field nn, set the fill width (in pixels) associated with the top line of
a rectangle.
wwww is a number between 1 and 4 digits in length. A width of zero means
there is no fill associated with the top line.
Summary of Contents for DX-2200-SW-02
Page 84: ...Page 84 of 87 ...
Page 85: ...Page 85 of 87 ...
Page 86: ...Page 86 of 87 ...
Page 87: ...Page 87 of 87 ...
