7.2.2 Top-hat rail assembly
The optional "DIN rail mounting set for myDatanet housing 86x126 (206.634)" equipment is required for the
top-hat rail assembly.
Step 1 of the top-hat rail assembly
Step 2 of the top-hat rail assembly
1
myDatalogNANO
3
Assembly loop (included in the scope of delivery of
206.634)
2
Delta PT M3.5x8 Torx 15 (included in the scope of
delivery of 206.634)
1. First attach the assembly loop (3) using the screws (2) included in the "DIN rail mounting set for
myDatanet housing 86x126 (206.634)" equipment set to the myDatalogNANO (see "Step 1 of the top-
hat rail assembly " on page 42).
2. Place the assembly loop (3) onto the top edge of the top-hat rail. When turned slightly around the
horizontal axis of the myDatalogNANO with the assembly loop (3) attached, the assembly loop (3)
engages on the top-hat rail (see "Step 2 of the top-hat rail assembly" on page 42).
42
Rev. 02
Summary of Contents for myDatalogNANO
