Chapter 10 XML interface
decpl4 - decpl7
Number of decimal places that are used by all of the server display elements
Important note: The content of the field must be set to 0 for Digital channel mode (no
decimal places)
Value
Explanation
-1
Standard
0
No decimal places
:
:
6
6 decimal places
The following parameters apply to the "Internal channels" (see "Internal channels" on page 68).
title1
Freely selectable channel title for the internal battery or rechargeable battery voltage
units1
Battery: String that is used as a measurement unit by all of the server display elements [0-
16 characters]
alarm_low1
An alarm is triggered, if the measurement value drops to or below this value.
alarm_high1
An alarm is triggered, if the measurement value meets or exceeds this value.
hysterese1
Hysteresis for the all-clear in the event of an alarm/warning (e.g. Hyst=5%, alarm or warning at
100 -> all-clear at 95) or reset the trigger (e.g. Hyst=5%, level = greater or equal, trigger at 100 ->
reset at 95)
title3
Freely selectable channel title for the GSM level
units3
GSM level: String that is used as a measurement unit by all of the server display elements [0-
16 characters]
alarm_low3
An alarm is triggered, if the measurement value drops to or below this value.
alarm_high3
An alarm is triggered, if the measurement value meets or exceeds this value.
hysterese3
Hysteresis for the all-clear in the event of an alarm/warning (e.g. Hyst=5%, alarm or warning at
100 -> all-clear at 95) or reset the trigger (e.g. Hyst=5%, level = greater or equal, trigger at 100 ->
reset at 95)
title8
Freely selectable channel title for the internal device temperature
Rev. 01
79