Bio-6000 User Guide 7
Locking the TMA
To lock the TMA (for shipping and other purposes), follow the steps below:
Step 4: Installing the TMA
1. Attach the TMA by sliding the posts at the rear of the TMA into the holes.
Unlocked
2. Plug the connector of the TMA into the
scanner’s 15-pin accessory port.
1. Make sure the TMA is connected to the
scanner, then turn off the scanner if
your scanner is on.
2. Turn the scanner back on. The TMA's
carriage will move to the standby
position in a few moments.
3. When the indicators on the front of
your TMA and scanner stop blinking,
turn the locking knob clockwise to the
lock position “ ”.
4. Turn off your scanner and disconnect the TMA connector from the scanner. The
TMA is ready for transport.
Locked
3. Unlock the TMA.
a) Remove the yellow “Unlock” sticker from the TMA.
a) Look for the locking knob at the base of the TMA.
b) Turn the locking knob counterclockwise to the unlock position “ ”.
