12
drive motor 1
drive motor 1
open
open
2.
Screen will now display ‘Drive Motor Open’.
You can drive the motor in the open direction by holding down the
PB
button or button
1
on a coded remote.
3.
Now rotate dial to display ‘Drive Motor 1 Close’.
You can drive the motor in the close direction by holding down the
PB
button or button
1
on a coded remote.
drive motor 1
drive motor 1
close
close
4.
Now rotate dial to ‘Direction Change Press PB’.
If you want to change motor direction, press
PB
, and a green light will appear to show the
direction has been changed. Otherwise rotate dial to ‘Motor Setup’.
direction change
direction change
press pb
press pb
direction
direction
changed
changed
4. e-Gate Single Set Up – End Stop
system type
system type
end stops
end stops
system not setup
system not setup
12 9 volts
12 9 volts
First display is ‘Encoder’, rotate dial to select ‘End Stops’. Now press
PB
and a green light
will appear.
1.
Power up display, it will read ‘System Not Setup’. Now press
PB
to enter set up menu
‘System Type’.
5.
Rotate dial to ‘Setup System Press Button’, now press
PB
and gate will close until it reaches
the close limit. (Note: Gate should be in half way position)
setup system
setup system
press button
press button
setting
setting
close
close
