Microtech e-GATE, Instruction Manual

Page: 10 / 16

10
3. e-Gate Single Set Up – Limit Switch 2 Wire
4. Now rotate dial to ‘Direction Change Press PB’.
If you want to change motor direction, press PB , and a green light will appear to show the
direction has been changed. Otherwise rotate dial to ‘Motor Setup’.
direction change direction change
press pb press pb
direction direction
changed changed
system not setup system not setup
12 9 volts 12 9 volts
system type system type
limit 2 wire limit 2 wire
First display is ‘Encoder’, rotate dial to select ‘Limit 2 Wire’.
1. Power up display, it will read ‘System Not Setup’. Now press PB to enter set up menu
‘System Type’.
2. Screen will now display ‘Drive Motor Open’.
You can drive the motor in the open direction by holding down the PB button or button 1
on a coded remote.
drive motor 1 drive motor 1
open open
3. Now rotate dial to display ‘Drive Motor 1 Close’.
You can drive the motor in the close direction by holding down the PB button or button 1
on a coded remote.
drive motor 1 drive motor 1
close close
5. Rotate dial to ‘Setup System Press Button’, now press PB and gate will close until it reaches
the close limit.
setup system setup system
press button press button
setting setting
close close