13
M1171431
Process Steps:
1.
Feet removal – Use plastic tweezers / spudger to lift one edge of each foot. Grasp the loose end and pull
the foot from the D-bucket. Ensure all adhesive tape remnants and glue residue are removed. Clean the
D-bucket foot recesses with 70% Isopropyl Alcohol.
2.
Remove C-cover screws – Using a PH0 screwdriver uninstall the three screws from the rear, and four screws
from the front D-bucket foot recesses. Prior to unscrewing, ensure the driver head is seated correctly in the
screw recess by lightly turning the driver clockwise until it can be felt engaging fully with the screw.
CAUTION:
Ensure all (7) screws are removed from the enclosure before starting C-cover removal,
otherwise there is a high risk of irreversibly damaging the C-cover and D-bucket.
CAUTION:
Ensure the plastic pick depth into the C-Cover is kept shallow to avoid damaging internal
features.
CAUTION:
Remove C-Cover exactly as described in this step to avoid damaging the Flexible Printed
Circuit (FPC) connected between the C-Cover and the Main Board. Do not pull the C-cover apart beyond
45 degrees otherwise damage to C-cover FPC could occur.
CAUTION:
Remove C-cover and hold in a hover position as described to avoid damaging the display
glass. Never rest the rear edge of the C-cover on the device at the display hinge point or allow the
C-cover to impact or touch the display during this step.
