19
M1171431
5.
Install C-cover Screws – Close the top cover and turn the unit over. Use a PH0 screwdriver to install the
previously removed C-cover screws. Two of the seven screws are longer in length. Refer to the below photo
for their location. All screws should be installed until just snug and seated, and then turned another 90
degrees (1/4 turn).
Longer Screw Locations
CAUTION:
Ensure the longer screws are installed in the two corner locations under the rear foot pad.
Environmental Compliance Requirements
All waste electrical and electronic equipment (WEEE), waste electronic components, waste batteries, and electronic
waste residuals must be managed according to applicable laws and regulations. and H09117, “Conformance
Standards for Environmentally Sound Management of Waste Electrical and Electronic Equipment (WEEE),” which
is available at this link:
https://www.microsoft.com/download/details.aspx?id=11691
In case of questions, please
contact [email protected]
©2020 Microsoft.
