21
X22-19688-01
4. Imaging – Image the new rSSD by using a BMR Imaging key specific to the device model.
IMPORTANT:
Refer to Surface imaging process - Surface Imaging Tools
IMPORTANT:
Once the rSSD has been removed, powering on the device requires that the rSSD and
C-cover FRUs are installed and device must be connected to a power supply. Refer to Procedure-
Installation (rSSD) section (
) for details.
5. Run SDT - Run SDT to ensure all device features and functions operate as expected.
6. Install feet - If SDT tests pass and no further actions are to be performed on the device, follow steps for
Procedure – Installation (Non-Skid Foot Pad [
]).
