10
normal
display
pass code
entering
unit
set ting
down range
limitation
setting
damp
setting
up range
lim itati on
setting
1 pass code
2 unit
3 down range
limitation
4 up range
limitation
5 damp
6 main volume
setting to zero
Z key
Z key
M key
M key
S key
M key
M key
M key
M key
Z key
Z key
Z key
Z key
Z key
S key
S key
S key
S key
S key
main volume
setting to zero
Figure 6.3-1
Note:
In double key operation, while
“▼ ”
flashes, press down S key to
realize M key function.
The pass code of configuration data setting is 00002, when it is
correct, you can start data setting, if not, it will be back to normal display.
If the setting data is over the limitation, LCD display “OVER” , then
press down S key or Z key to reset.
While entering configuration data setting, if no press down in two
minutes, it will be back automatically.
When finishing the setting and going back the normal display state, if
you press down Z key again in ten seconds, it will restart the setting and
ignore the pass code procedure.
In 5.2 data setting, you can do the pass code entering, the up and down range
limitation and damp setting, but as for unit setting and main volume setting zero,
