Microsensor MPM4841, Operation Manual

Page: 9 / 12

7
bolt on the top of plug with little screwdriver and pull out the plug
from transmitter.
b) To disconnect the plug, please take out the central bolt on the top
of plug, then turn the plug to the bottom and insert a little flat
screwdriver into a corner signed “Lift” and give a force. The plug
core will be disconnected with housing.
c) To connect the cable, put the cable through the cable jack and
connect the wires with terminals on the plug core correctly (the
connection terminals are signed with clear numbers). Please
choose Φ4.9mm shield cable and connect the cable reliably to
prevent short circuit.
d) Pull the cable slightly and push the plug core into housing (a
rattling sound could be listened), then screw down the cable-fixed
nut.
e) To remove the cable, loose the cable-fixed nut to relax the cable,
and operate as Item2 to disconnect the plug. Take out the cable
from terminals with little screwdriver and pull out the cable from
cable-fixed nut, then renew the connection between plug core,
plug and socket.
Caution: renew the rectangle-ring to the pre-mounting situation in order
tomaintain the protection class when connect plug and socket.
5 Unpacking
、
Components and Storage