Microscan Vision MINI Xi Smart Camera, Manual

Page: 59 / 65

Appendix F
CloudLink Web HMI
F-2 Vision MINI Xi Smart Camera Guide
Connecting
To launch CloudLink, use your favorite web browser and enter the address of your device
in the browser’s address bar. For example, if you have a Microscan smart camera on your
network at address
10.20.1.123 , you would enter:
CloudLink also works with Visionscape Software and with AutoVISION ’s Emulator.
To connect to a software-based job running in FrontRunner or AutoVISION:
First, be sure the job is running, and then type the following into your browser’s address bar:
Note: You must specify port 8080 for a PC-based connection. If you are connecting to a
PC-based system from a different machine on the network, use the IP address of the PC
instead of the local host. For example, use
http://10.20.1.234:8080 if the PC’s IP address
is 10.20.1.234 .
Once you press the Enter key, you should see the following home page:
Click the CloudLink Dashboard
icon to launch the application.