Microscan HawkEye 45T, User Manual

Page: 51 / 102

Handle Trigger Programming
Optimization and
T
rig
g
e
r Pr
ogramming
2
Rev 2.0.0, Jan 2009 HawkEye™ 45T User Manual
2-3
Handle Trigger Programming
Scan the codes in Figure 2–3 to set the handle trigger functionality:
FIGURE 2–3.
Handle Trigger Programming Codes
Continuous Scan Settings
Scan the codes in Figure 2–4 to turn continuous scanning on/off:
FIGURE 2–4.
Continuous Scan On/Off Codes
Note: This function is only recommended for short term use because of battery
consumption (see
“Continuous Scan — Sleep Timeout” on page 2-4
).
Read Codes with Both Imagers (Default)
Read Code with Far-Field Imager ONLY
Read Code with Near-Field Imager ONLY
Both Near & Far Field On Near Field Only On
Far Field Only On Off (Default)