Microscan HawkEye 45T, User Manual

Page: 52 / 102

Chapter 2
Optimization and Trigger Programming
2-4
HawkEye™ 45T User Manual Rev 2.0.0, Jan 2009
Continuous Scan — Sleep Timeout
Scan the codes in Figure 2–5 to set the amount of time a cabled HE45T will
operate in continuous scan mode
before entering sleep mode:
FIGURE 2–5.
Continuous Scan Sleep Timeout Codes
Scan the codes in Figure 2–6 to set the amount of time an uncabled HE45T will
operate in continuous scan
mode before entering sleep mode:
FIGURE 2–6.
Continuous Scan Wait Before Enter Sleep Mode Codes
Note: This function is only recommended for short term use because of battery
consumption.
Cabled - 2 Hours
Cabled - Always (Default)
Uncabled - 5 Minutes (Default)
Uncabled - 15 Minutes
Uncabled - 30 Minutes