Micros gateBox, User Manual

Page: 6 / 6

TECHNICAL SPECIFICATIONS
gateBox
electrical parameters
supply voltage 12 - 24V AC / DC average current
consumption 50mA
energy consumption < 2W maximum current
consumption 250mA
control output Input signal
number of output control 2 number of inputs 2
type of output control
devices open collector, pulse input type logical
maximum voltage 24V voltage range 12 - 24V AC / DC
maximum load 20mA polarization inputs detected automatically
galvanic isolation yes galvanic isolation yes
physical characteristics of the device
dimensions 54 x 41 x 20 mm protection level IP20
housing made of polyurethane
composition not
containing halogens,
Self-extinguishing for
thermal class B (130 °C) mounting method component adhesive
(foil) or in housing
characteristics of the communication
communication standard
μWiFi, compatible with
WiFi frequency 2.4 GHz
transmission type bi-directional,
encrypted API open
mode direct connection (as
Access Point), Wi-Fi
connection via a
standard router,
connection with access
from any location in
the world (requires
only access to the
Internet) compatible devices Apple iPhone, Apple
iPad, iPad Mini, Android,
Windows Phone,
computers and mobile
devices operating a fully
HTML5, Apple Watch
support coming soon.
FAQ
1. The connection is correct but gate still not working, what should I do?
We suggest to change the connection of the wires in the connector O1. When the controller still does not work, please contact our technical support. Before call us or in before send an email, please check the gate controller model to inform us.
2. How to proceed to reset the gateBox?
Disconnect the power supply. On the expansion slot (small black connector next to the diode) between the pins 1 and 2 (viewed from above), place the jumper (e. g. A piece of wire). Turn on the power – the diode will pulse for 5 seconds with a
frequency of two times by second. Then, the diode start to pulse faster (8 times per second), in this moment disconnect the jumper - 5 seconds. Reset will be confirmed by a three second diode pulsation.
3. The device disconnects and loses the coverage. What to do?
We suggest to change the channel of the WiFi used. Increase the power transmission of the router, or as a last option use a WiFi network repeater.