Switched Mode Power Supply
Operating manual
PAP800UL
Perämiehenkatu 6, FIN 24100 Salo, Tel. +358 2 777 290, Fax +358 2 777 2918, [email protected], www.powerfinn.fi
1
2
3
4
NO
COMMON
NC
Jack pin 3
Jack pin 1
Jack pin 2
Common is connected to NC when the power is switched off.
Common is connected to NO when the power is switched on.
Cable
Black = common
Red = NO
Green = NC
Relay
Isolation:
Output to case: 500V
Output to gnd: 120V
Technical data:
1A@24Vdc
0,5A@120Vac
Temperature sense (Option T & S)
The sense cable enables the charger to adjust the output voltage in accordance with the battery voltage and
temperature fluctuations. The temperature sense cable is connected to connector J5. The sense cable is
connected to the battery as shown below. The temperature sensor is either glued 10 cm under the battery’s top
edge (see figure below), or to the cable tag connected to the battery minus.
J8
J5 J6
+
Š
temperature
sensor
black
red
5