➐
[Shutdown]
and
[Start]
buttons respectively for stopping the recording and beginning the
recording
NOTE:
To stop the recording, Spider SAS must be paired with and connected to the PC.
➑
Tabs:
[ECGs]
/: 2 ECG channels collected with RC013 or RC032, respectively short and long patient
cable
[Belts – Respi]
1st channel for nasal pressure (Respiration)
2nd channel for Thoracic effort (Belt)
3rd channel for Abdominal effort (Belt)
[
SpO
2
– Plethysmo]
1st channel for Oxygen saturation (%)
2nd channel for plethysmography curve
➒
Cursor to adjust the amplitude of the ECG signal displayed in graphic areas
➓
and
⑪
. The
cursor does not modify the gain of the recorded signal.
⑫
Colored bargraph to indicate quality of impedance of the signal displayed in graphic areas
➓
and
⑪
. (See § 10.3.1)
➓
and
⑪
Graphic areas:
Display signals captured by electrodes and sensors depending on the tabs selected (see
➑
).
LAUNCHING HOOKUP RS
Click on the HookUp RS shortcut created on the desktop during the installation of the
software. The screen shown below is then displayed.
10.2.
10. STARTING A RECORDING WITH HOOKUP RS
SPIDER SAS – PHYSIO HUB – HOOKUP RS – U908F
37
