Microplex SOLID F44, User Manual

Page: 6 / 167

Safety Regulation
IV
Notes to Operators and Key Operators
1
The following safety rules should be observed
−
The unit should be kept free from moisture, dirt, dust and exposure to eat and
direct sunlight at all times.
– Keep hands, hair and clothing away from rollers and other moving parts.
– Be sure that the proper voltage is used and that the machine is well rounded. The
use of electrical extension cords is strongly discouraged.
– For best performance, only our authorized supplies are recommended for use
with this unit. Failure to use our authorized supplies may cause damage to the
unit, in which case the warranty may be rendered void.
– Do not attempt to remove any Cover that is secured.
1.1 FCC Part 15 - Radio Frequency Devices (For U.S.A. Users)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
– This device may not cause harmful interference.
– This device must accept any interference received, including interference that
may cause undesired operation.
1.2 WARNING
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
hers own expense.
The design and production of this unit conforms to FCC regulations, and any
changes or modifications must be registered with the FCC and are subject to
FCC control. Any changes made by the purchaser or user without first contacting
the manufacturer will be subject to penalty under FCC regulations.
1.3 Interference-Causing Equipment Standard (ICES-003 ISSUE 4)
(For Canada Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.