5
Appendix A:
Trouble shooting
Identify fingerprint successfully but it cannot be
unlocked
Please make sure there is no external tension on the shackle,
applying tension to the shackle will affect the motor’s
unlocking function.
In case, you encountered above situation, please follow out
below procedures to unlock
1.
press the shackle once again to lock PL-1000+.
2.
Try to do the unlock again but note that to avoid to apply
tension to the shackle.
Press the finger onto the fingerprint sensor, nothing
happened
Please make sure that you have pressed the shackle once to
get power, PL-1000+ will automatically enter the power-off
mode if there is no any operations after 5 seconds to
enhance the battery life.
In case, you encountered above situation, please follow out
below procedures to unlock
1.
Press the shackle once
2.
Press your fingerprint to unlock.
Try to plug USB cord in to USB connector to supply the
emergency power and do charging for the PL-1000+.
The fingers can’t be identified
Make sure your finger is not wet or sweated.
Make sure that enough pressure has been applied to
the