Compact Numeric Keypad - MP3393
Page 2 of 9
T_MP3393-Compact Numeric Keypad Leaflet_V1.3
Contents of MP3393 Kit
1 x MP3415 Compact Numeric Keypad
1 x MP3406 Instructions for Use (this document)
Features and Specifications
22 multi-function keys enabling full stimulator control when used in combination with a
Micropace Touch Screen (MP3114).
High quality mechanical switches with ~20 million keystroke lifetime.
Weight: 235 g (0.51 lb)
Dimensions: 159 x 108 x 38 mm (6.25 x 4.25 x 1.5 in)
Cable length: 2m
CE, FCC, and RoHS approvals.
Introduction
For Stimulators with touch screens, the Compact Numeric Keypad (MP3415) may be substituted for the
Standard Keyboard to reduce desktop footprint. The user may then use the touch screen or the Keypad
arrow keys (NumLock OFF) to select pacing protocols, stimulation channels and required extra stimuli,
and may use the Keypad number keys (NumLock ON) for rapid adjustment or entry of numeric values.
Starting and stopping stimulation / pacing can be done with the dedicated PACE key.
This Numeric Keypad is intended for use as a permanent replacement to the Standard Keyboard. It is
designed, however, to replace the keyboard without any software configuration required. Therefore, the
Numeric Keypad and the Standard Keyboard can be swapped as necessary depending on your needs.
Note that the three setup functions of naming protocols, pace sites and user setups require use of the
alpha keys on the Standard Keyboard.
Compatibility
1. Numeric Keypad MP3415 is compatible with EPS320 Stimulator Software 3.21 or above only.
2. The Numeric Keypad MP3415 has been tested with all revisions of Bona Light Computers,
MP3093.
3. Numeric Ke
ypad MP3415 may be used with EPS320BT, StimLab™ (Local Touch Screen) and
StimCor™ products.
4. The Keypad may be connected using up to 10 metre extension PS/2 cable, such as is
contained in MP3403 (StimLab local 10m Cable bundle) and MP3169-10 StimCor Local 10m
extension cable bundle.
Note:
StimLab™ Remote (trunk) Cable, MP3164-17 does not have a provision for connecting
this Keypad. The StimLab has an on-screen keypad. If you require a hardware keypad at the
bedside, contact your distributor or Micropace for alternatives.
Cautions
1. In order to prevent unreliable and unpredictable key operation:
a) Use only with Micropace EPS320 software 3.21 or higher.
b) Use only in combination with Touch Screen (MP3114) that is enabled in software.
c) Do not use concurrently with ke
yboard (either with ‘Y’ splitter or by simultaneous use of
PS2 and USB ports).
d) Do not exceed maximum PS2 cable extension length 10m. Longer extensions require
special extender equipment.
e) Do not use with a PS2 to USB adaptor, as unexpected actions, including inadvertent
toggling of pacing, may result.
