I N S T A L L I N G A N D R E M O V I N G H A R D W A R E
Removing and Installing Drives
10 -68
1 0
5
Attach the rails to the drive. (The 3.5-inch drive rails have an
L
or an
R
cut in them. Install the rail
with the
L
on the left side of the drive and install the rail with the
R
on the right side.)
6
Slide the drive into the bay.
7
Reconnect any power, data, or audio cables to the drive.
8
Push the drive in evenly until it is fully seated, and the green rails snap into place.
9
Replace the bezel. See “Replacing the Bezel” on page 9-56.
10
Replace the access panel. See “Replacing the Access Panel” on page 9-54.
Figure 19.
Sliding the 3.5-inch Drive into the Bay
Figure 20.
Sliding the 5.25-inch Drive into the Bay