User Guide
10
Step 2: set up the Agent
The Agent needs in the Bridge mode as in in 2.2.2.
In the router management interface of other routers (except the router set in the first step),
select "Network
—
EasyMesh
—
General", in the general setting page:
Fill in "Mesh Agent
”
in
“
Device Name".
Select "Agent" in "Role".
Click the "Save & Apply" interface button.
Step 3: Two devices
’
EasyMesh networking
After the two devices complete step 1 and step 2, the "General" interface will refresh, and the
"start PBC" button will appear.
In the "General" interface of one of the devices, click the "Start PBC" button or short press
the device's WPS button, and within two minutes enter the "General" interface of the other
device, click "Start PBC" button or short press the WPS button of the device to trigger
automatic network pairing. (Note that long pressing the WPS key is rest)
