Installing the Drive
To install the P420m or P320h drive:
1. Power down the system.
2. Ensure you are ESD-grounded before touching the drive or host system.
3. Remove the drive from the ESD packaging and verify it is not damaged.
If you suspect that the board is damaged, contact your local Micron representative
or the P420m/P320h applications team.
4. Remove the lid or case from the host system to expose the PCIe slots into which
the drive will be inserted.
5. Locate an available Gen2 x8 PCIe slot (Figure 5) and verify the slot is 25W-capable.
Check the system or motherboard documentation for information on locating and
identifying PCIe slots.
Figure 5: Available Gen2 x8 PCIe Slots
6. Insert the drive into the PCIe slot (Figure 6 and Figure 7).
P420m/P320h HHHL PCIe SSD Installation Guide
Installing the Drive
PDF: 09005aef8497e00a
P420m_P320h_HHHL_installation_guide.pdf - Rev. V 12/14 EN
9
Micron Technology, Inc. reserves the right to change products or specifications without notice.
©
2012 Micron Technology, Inc. All rights reserved.
