27. Complete the installation and reboot the system. Make sure you do not update the
grub package using Ubuntu updates.
Citrix XenServer
To use the P420m/P320h as a boot device in XenServer, only one drive can be used to
store the operating system during the installation. The installation process may not
work correctly if there are two or more drives installed.
Note:
The support pack includes several ISO images; make sure to select the image that
matches the build ID of your system. The driver will not install correctly if the wrong
ISO image is used.
To find the build ID of your system:
1. In XenCenter, click
XenServer Host
.
2. Click the
General
tab.
3. Scroll down and expand
Version Details
to view the build number. The last six dig-
its of the ISO name corresponds to the build ID.
To use the P420m/P320h as a boot device in XenServer:
1. Copy the
mtip32xx iso
image file that is used to load the driver on the XenServer to
a USB device.
2. Boot from the XenServer CD/DVD.
3. When prompted to load a device driver, press
F9
and load the
mtip32xx iso
image
from the USB device.
4. Remove the USB device.
5. Press
Ctrl
+
Alt
+
F2
to open a terminal.
6. Locate the major number of the P420m/P320h drive through a shell:
[root@localhost ~]# Is -lh /dev/rssda
brw-rw----. 1 root disk 252, 0 Jun 10 18:14 /dev/rssda
In this example, the major number is 252.
7. Edit the /opt/xensource/installer/diskutil.py file using an editor of your choice
and add
P420m/P320h
to the disk_nodes variable in /opt/xensource/installer/
diskutil.py (between the device nodes
/dev/ida
and
/dev/rd
), replacing <ma-
jor_num> with the number you obtained in step 6:
disk=[ (<major_num>, x*16) for x in range (16) ]
8. Save and exit.
9. Start the installation by entering the following command:
#/opt/xensource/installer/init
10. Continue the installation and select the P420m/P320h device node (for exam-
ple,
/dev/rssda
) as a disk for virtual machine storage when prompted.
11. Select
Yes
for supplemental pack installation.
12. After the preinstallation step is complete, provide the supplemental pack (for ex-
ample, oem:mtip32xx 6.1.0-59235p) when prompted by inserting the USB device
again and locating the mtip32xx driver.
13. After the mtip32xx driver is installed, select
SKIP
when prompted for additional
supplemental packs.
14. Installation is complete when the installer ends at the shell.
15. Enter the
reboot
command to boot the XenServer.
P420m/P320h HHHL PCIe SSD Installation Guide
Using the P420m or P320h as a Boot Drive
PDF: 09005aef8497e00a
P420m_P320h_HHHL_installation_guide.pdf - Rev. V 12/14 EN
32
Micron Technology, Inc. reserves the right to change products or specifications without notice.
©
2012 Micron Technology, Inc. All rights reserved.
