Micron MR603b, Manual

Page: 10 / 10

Configuration
The pre-loaded configurations are shown below. Unless otherwise specified when the receiver was ordered,
config 1 is enabled by default. The other loaded configurations can be selected using a
power-on
configuration change or by programming.
Port 1: Centre-off
throttle
2: MyLocoSound
triggers on A-D
(Tx22)
3: MyLocoSound
triggers on A-D
(Tx20)
4: Tx with 3-way
toggle on ch2 & ch4
H1 Centre-Off ch1 Centre-Off ch1 Centre-Off ch1 Low-Off ch1, dir ch3
P1 Front Light on H1
(LED2) Front Light on H1
(LED2) Front Light on H1
(LED2) Momentary on ch2,
high 0V
P2 Rear Light on H1 Rear Light on H1 Rear Light on H1 Momentary on ch2,
low 0V
P3 Momentary on ch3,
low 3.3V Momentary on ch3, low
3.3V Momentary on ch3, low
3.3V Momentary on ch4,
high 0V
P4 Momentary on ch3,
high 3.3V Momentary on ch3,
high 3.3V Momentary on ch3,
high 3.3V Momentary on ch4,
low 0V
P5 Momentary on ch5,
low 3.3V Momentary on ch5, low
3.3V Momentary on ch5, low
3.3V Momentary on ch5,
low 3.3V
P6 Momentary on ch5,
low 0V Momentary on ch5, low
0V Momentary on ch5, low
0V Momentary on ch5,
low 0V
F1/A/P7 Front Light on H1 Momentary on ch3,
high closed Momentary on ch2, low
closed Front Light on H1
(LED2)
F2/B/P8 Rear Light on H1 Momentary on ch3, low
closed Momentary on ch4, low
closed Rear Light on H1
F3/C/P9 Momentary on ch5,
low closed Momentary on ch5, low
closed Momentary on ch5, low
closed Momentary on ch5,
low closed
F4/D/P10 Latch on ch5, start
open, toggle low
Latch on ch5, start
open, toggle low Latch on ch5, start
open, toggle low Latch on ch5, start
open, toggle low
LED2 P1 P1 P1 F1
Selecta Enabled Enabled Disabled Disabled
LVC Enabled Enabled Enabled Enabled
Sleep
time 1 hour 1 hour 1 hour 1 hour
Cruise Enabled Enabled Enabled Enabled
Other configurations are available to special order or you can configure yourself by programming.
Micron R/C, www.micronradiocontrol.co.uk, +44 (0)1653 696008 Micron MR603b 2.4GHz DSM2/DSMX Receiver : 10 of 10