TN-29-16: Boot-from-NAND with the TI OMAP2420 Processor
Overview
PDF: 09005aef81fd5f2d / Source: 09005aef81fd5ecd
Micron Technology, Inc., reserves the right to change products or specifications without notice.
tn2916_boot_from_nand_omap2420.fm - Rev. D 6/07 EN
1
©2006 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by
Micron without notice. Products are only warranted by Micron to meet Micron’s production data sheet specifications. All
information discussed herein is provided on an “as is” basis, without warranties of any kind.
Technical Note
Boot-from-NAND Using Micron
®
MT29F1G08ABB NAND Flash
with the Texas Instruments™ (TI) OMAP2420 Processor
Overview
NAND Flash memory devices are designed for applications requiring nonvolatile, high-
density, solid-state storage media. Historically, NAND Flash has been used extensively in
applications such as mass storage cards and digital cameras. With its low cost and high
performance, NAND Flash is beginning to make its way into more complex embedded
systems where NOR Flash has dominated in the past—for example, in mobile phones.
In complex embedded systems, one of the challenges associated with a change from
NOR Flash to NAND Flash has been the boot process. NOR Flash has been a popular
choice for these systems because it contains a traditional memory interface (including
both address and data buses), making it capable of execute-in-place (XIP) operation. XIP
memory enables the system CPU to execute code directly from the memory device
because the boot code is stored on and executed from a single device.
NAND Flash is a page-oriented memory device that does not inherently support XIP, at
least not in the same manner as a typical XIP memory device. Operating system and
boot code can be stored in NAND Flash memory, but the code must be copied (or shad-
owed) to DRAM before it can be executed. This requires system designers to modify the
boot process for their systems when using NAND Flash. The payoff for this modification
is that the system benefits from the lower cost of NAND Flash as the storage solution and
the higher performance of DRAM as the XIP memory.
